Color steel sandwich panels, as an essential building material in today's architecture, are also a significant expense. Therefore, we need to pay attention when storing on site. Let Jinan Color Steel Sandwich Panel Factory introduce the precautions for on-site storage of color steel sandwich panels.
1. Color steel sandwich panels should be stored on sleepers or other cushion blocks, and steel plates should not directly contact the ground. If placed outdoors, it must be completely covered with waterproof cloth, especially aluminum zinc steel plate. The steel plates will turn black when water enters between the plates, so they must be covered with waterproof cloth. If there is water or mist between the steel plates, they must be separated, wiped dry with a clean soft cloth, and placed in a ventilated area to dry.
2. The stacking area of color steel sandwich panels should be far away from other exposed steel materials, such as steel bars, to prevent the rust on these steel materials from falling onto the color steel plates, which are difficult to remove, causing rust spots and penetrating the steel plates.
When repeatedly stacking color steel sandwich panels, no more than four boxes should be allowed each time, and other heavy objects should not be placed on the board. It is strictly prohibited to get on or step on people. The daylighting board should be stored separately and it is strictly prohibited to place items such as steel plates.
4. Insulation cotton and steel wire mesh should be placed in temporary sheds. When there are no conditions, a cushion must be placed on the ground to prevent direct contact between the insulation cotton and the steel wire mesh, and to prevent moisture. Above and around must be covered with waterproof cloth.
Before installation, when transporting the steel plate to the roof and temporarily placing it on the roof, it must be as close to the roof as possible. It is strictly prohibited to place it on the installed steel plate to prevent gravity from crushing the steel plate. The steel plates that were not installed on the roof that day should be stacked in bundles to prevent them from being blown away by strong winds.
6. Parts such as screws and sealant must be placed in the warehouse to avoid loss.
That's all we need to know about the precautions for on-site storage of color steel sandwich panels. We hope it can be helpful to you. For more information, please visit our website http://www.cworksmarketing.com Consult and learn more!