閉口樓承板經實驗證實更具強大的承載力和抗剪力，閉口肋形的特殊設計，讓鋼承板的板肋完全被混凝土裹護，如同現澆板里的鋼筋，從而能夠大限度的發揮各自的特性，成功應用于受力配筋的樓承板系統中，并有非常好的耐火性能。那么你知道閉口樓承板與普通開口板相比安裝技術優勢如何嗎？下面濟南彩鋼夾芯板廠為您分析：

Closed floor support plates have been experimentally proven to have stronger load-bearing capacity and shear resistance. The special design of closed ribs allows the ribs of the steel support plate to be completely wrapped in concrete, just like the steel bars in the cast-in-place slab, allowing them to fully utilize their respective characteristics. They have been successfully applied in reinforced floor support plate systems and have excellent fire resistance performance. Do you know the installation technology advantages of closed floor bearing plates compared to ordinary open plates? Below, Jinan Color Steel Sandwich Panel Factory will analyze for you:

1．閉口樓承板排板時只需按跨距順排，與鋼梁順接時，由于板底平整，有足夠與鋼梁實接面積。因此不用處理可直接鋪過去（開口板因要避免與鋼梁虛搭而需切割補板）。

1. When arranging the support plates of the closed floor, it is only necessary to arrange them in order according to the span. When connecting with the steel beam in order, due to the flat bottom of the plate, there is enough solid connection area with the steel beam. Therefore, there is no need to handle it and it can be directly laid over (the open plate needs to be cut and repaired to avoid false overlap with the steel beam).

2．開口板在端口處應封堵板，以免澆筑混凝土進從板底開口漏漿，而閉口樓承板因腹板閉合而不用端頭堵板。

2. The opening plate should be sealed at the port to prevent concrete from leaking from the bottom opening of the plate, while the closed floor bearing plate does not need to be sealed at the end due to the closed web plate.

3．閉口樓承板因板底平整，無論與鋼梁橫搭還是順搭，均能與鋼梁上翼板充分結合，因此鋼梁上翼板頂面無需噴防火涂料。而開口型鋼承板與鋼梁之間具有空洞，需做肩塞補滿空洞。

3. Due to the flat bottom of the closed floor support plate, it can fully integrate with the upper wing plate of the steel beam, whether it is horizontally or vertically overlapped with the steel beam. Therefore, the top surface of the upper wing plate of the steel beam does not need to be sprayed with fireproof paint. There is a void between the open steel bearing plate and the steel beam, which needs to be filled with shoulder plugs.

4．閉口樓承板完全替代下層鋼筋，減少現場鋼筋制作量，可減輕現場勞動量，加快施工速度。同時取消原設計下層鋼筋，可為樓板中鋪設電線套管提供更大空間。

4. The closed floor bearing plate completely replaces the lower layer steel bars, reducing the amount of on-site steel bar production, reducing on-site labor, and accelerating construction speed. At the same time, canceling the original design of the lower layer steel bars can provide greater space for laying wire sleeves in the floor slab.

另外由于上述優勢可明顯加快加工速度，縮短工期。因此，采用閉口樓承板一方面可降低工程直接成本，另一方面又可降低工程管道費用。您有怎樣的疑惑就來我們網站http://www.cworksmarketing.com咨詢吧！

In addition, due to the above advantages, the processing speed can be significantly accelerated and the construction period can be shortened. Therefore, the use of closed floor support plates can not only reduce the direct cost of the project, but also reduce the pipeline cost of the project. If you have any doubts, please come to our website http://www.cworksmarketing.com Consult!