C型鋼應用可以說是相當的廣泛，不僅可以作為鋼結構建筑中的檁條、墻梁；也可以自行組合成輕量型屋架、托架等建筑構件。不管是哪種用途，都會涉及到C型鋼的切割。下面濟南C型鋼廠家就給大家介紹一下常用的C型鋼切割和打孔方式，希望對大家有所幫助！

The application of C-section steel can be said to be quite extensive. It can not only be used as purlins and wall beams in steel structure buildings, but also be self-assembled into lightweight roof trusses, brackets and other building components. Whatever the use, it will involve the cutting of C-section steel. The following Jinan C-section steel manufacturers will introduce to you the commonly used C-section steel cutting and drilling methods, I hope to help you all!
由于不同的切割方法有著不同的切割效果，因此需要按照客戶的要求進行適當的選用。一般情況下，C型鋼在鋼結構中應用的話，它的切割盡可能選擇在剪切機上或鋸床上進行，尤其是對于薄壁型鋼屋架。

Because different cutting methods have different cutting effects, it is necessary to select suitable cutting methods according to customer's requirements. Generally speaking, when C-section steel is used in steel structure, its cutting should be carried out on the shearing machine or sawing machine as far as possible, especially for thin-walled steel roof truss.

之所以這么建議，是因為這里要去下料要準確，易電動鋸割法做為適合，不僅工效高，而且斷面光滑平整、質量好，切割誤差非常的小。當然，C型鋼也可以采用氣割的方式，但為了提高氣割質量，采用小口徑噴嘴，并在切割后用錘子輕輕敲打，使切口平整，滿足各種用途的要求。

The reason for this suggestion is that it is necessary to cut materials accurately here. Easy electric sawing method is suitable. It not only has high efficiency, but also has smooth cross section, good quality and very small cutting error. Of course, C-section steel can also be cut by gas, but in order to improve the quality of gas cutting, small-caliber nozzles are used, and after cutting, hammers are tapped lightly to make the cut smooth and meet the requirements of various uses.

C型鋼是一種經濟裁面型材，由于其截面形狀合理，產品在很多場合中都有運用，比如鋼結構建筑的檁條、墻梁等等。C型鋼在檁條方面可以起到良好的固定作用，當然這還得通過對C型鋼打孔才能做到

C-section steel is a kind of high-efficiency and economical section material. Because of its reasonable cross-section shape, products are used in many occasions, such as purlin, wall beam and so on. C-section steel can play a good fixed role in purlin, of course, this can only be achieved by punching C-section steel.

C型鋼通常都是由C型鋼成型機自動加工成型的，然后在在此基礎上進行打孔作業，經過測長確定出打孔的位置，然后利用相關設備沖出拉筋圓孔、橢圓連接孔等不同作用的孔，將型材切斷可以使用了。

C-section steel is usually formed by automatic processing of C-section steel forming machine, then drilling operation is carried out on this basis, the location of punching is determined by measuring the length, and then using related equipment to punch out the holes with different roles, such as pulling rib round holes, elliptical connection holes, to cut the profile and use it.

今天的精彩內容就暫且給大家介紹到這里了，小編十分感謝大家的認真閱讀，如果大家對還有問題想要咨詢濟南C型鋼廠家的，歡迎大家收藏我們的官網給我們留言：http://www.cworksmarketing.com

Today's wonderful content will be introduced here for the time being. Xiaobian is very grateful to you for your serious reading. If you want to consult Jinan C-section steel manufacturer for any questions, you are welcome to collect our official website and leave us a message: http://www.cworksmarketing.com.